What you need to rack
Racking means putting the balls in their starting shape before the break. A good rack makes the break fair, and a loose one makes it a lottery. You need three things:
- A triangle rack for 8-ball and 10-ball. It holds 15 balls in five rows.
- A diamond rack for 9-ball, if the bar has one. If not, the triangle works too (see below).
- The foot spot, the dot at the far end of the table, opposite where you break. The front ball of every rack sits on it.
Some rooms also use a thin plastic template that lies flat on the cloth and holds every ball in place. It gives a very tight rack, but check the house rules: some events allow it and some do not.
How to rack pool balls for 8 ball
- Set the triangle with its point on the foot spot.
- Put the 8 ball in the middle of the third row. That is the center of the rack.
- Put one solid and one stripe in the two back corners.
- Fill the rest with a mix of solids and stripes. The front ball can be any ball except the 8.
- Push the balls forward so they touch, then lift the triangle straight up.
| Row | Balls | What goes there |
|---|---|---|
| 1 (front) | 1 | Any ball except the 8, on the foot spot |
| 2 | 2 | Any |
| 3 | 3 | The 8 ball in the middle |
| 4 | 4 | Any |
| 5 (back) | 5 | A solid in one corner, a stripe in the other |
Mix the groups so no side of the rack is all solids or all stripes. For the rest of the game, read our bar pool rules guide.
How to rack 9 ball
- Make a diamond: rows of 1, 2, 3, 2 and 1 balls, nine in all.
- Put the 1 ball at the front, on the foot spot.
- Put the 9 ball in the middle of the diamond, the center of the row of three.
- The 2 to 8 go anywhere else.
No diamond rack? Use the triangle. Put the 1 ball at the point on the foot spot, build the diamond inside the front of the triangle, and leave the back two rows empty. Then hold the back of the diamond in place with your fingers as you lift. Full rules are in our 9 ball rules guide.
How to rack 10 ball
- Use the triangle, but only fill the first four rows: 1, 2, 3 and 4 balls, ten in all.
- Put the 1 ball at the front, on the foot spot.
- Put the 10 ball in the middle of the third row.
- The 2 to 9 go anywhere else.
Some events also ask for the 2 and 3 on the back corners. If your night has a rule like that, say so before the first match. The rest of the game is in our 10 ball rules guide.
How to get a tight rack
A tight rack is one where every ball touches the balls next to it. Gaps make the break dead, because the cue ball's energy stops at the gap instead of spreading through the rack.
- Brush the spot. Wipe away chalk dust or crumbs under where the front balls sit.
- Push forward. With the balls in the triangle, push the back row toward the front with your fingers until the front ball is on the foot spot.
- Hold and settle. Keep the pressure on and roll the triangle a tiny bit forward and back so the balls settle together.
- Lift straight up. Lift the back of the triangle first, slowly, so it does not drag any ball with it.
- Check. Look at the rack from the side at table height. If you see light between two balls, rack again.
Racking rules for a tournament
At a casual table, anyone racks. At a tournament, decide these before the first match and say them out loud:
| Decide | Common choices |
|---|---|
| Who racks | The opponent racks, the loser racks, or rack your own |
| Can the breaker check it | Usually yes: the breaker may look and ask for a re-rack if it is loose |
| Patterns | No set patterns. Balls other than the fixed spots go in at random |
| Templates | Allowed, or triangle only |
| Who breaks | Winner breaks, alternate breaks, or loser breaks |
Rack your own is popular in bars because it ends most arguments: if the rack is bad, it was your own. When the opponent racks, the person breaking should be allowed to look at it first and ask for a fix before they shoot.
Common racking mistakes
- Front ball off the spot. The rack sits too far forward or back, which changes how the break plays.
- The 8 in the wrong place. In 8-ball it has to be in the center, not at the front or on a corner.
- Both back corners the same group. In 8-ball, one solid and one stripe go in the corners.
- Lifting at an angle. Dragging the triangle pulls the back balls apart.
- Leaving gaps. A ball you can see light around will kill the break.
Put your racking rules on the event
Most racking arguments at a pool night come from players who expected a different rule. A free pool tournament app like PoolHost lets you set the game (8-ball, 9-ball or 10-ball), the break (alternate, winner or loser breaks) and Rack your own when you create the event. Players see those rules on the join page before they sign up, and they show on the TV and the printed bracket on the night.
Running the whole night? Read how to run a pool tournament. Want players to find your night? List it free in the Pool Directory.
Set your racking rules once
Game, break and Rack your own on the join page, the TV and the bracket. No credit card.
Start Free Event